Siemens SCD 19101 D Betriebsanleitung Seite 45

Instruction manual
Main menu
Utilities
Infos
44
Function Adjustment/range
Language English – German
Factory setting Press <+>
Installation Press <+>
RGB mode
With <+>,
H and V –
frequencies
H/V total, –
H/V start
Options Var. RGB mode inactive, Mode1,
Mode2, Mode3
H visible 100 ... 2000 using adjustment
keys (+/-)
V visible 100 ... 2000 using adjustment
keys (+/-)
H total 100 ... 2500 using adjustment
keys (+/-)
H start 0 ... 750 using adjustment keys
(+/-)
V start 0 ... 500 using adjustment keys
(+/-)
Install Press <+>
Test pattern Press <+>
Firmware, –
resolution,
timing
Hochauflösendes 19" Color Flat Panel Display SCD 19101 D/DT
Description
Select language for operation of the
OSD menu
Reset all functions such as brightness,
contrast, to the factory settings.
Adaptation to video signals which are not
saved as timing data in the device (if the
resolution output on the display does not
correspond to the resolution of the
source).
9 possible settings are displayed when
the <+> key is pressed.
Display H/V frequency of currently
applied video source
Display of used timing parameters of
currently applied video source
Var. RGB mode inactive: only use the
internal timing tables
Mode1: use the set parameters with
completely automatic adjustment (is
usually used).
Mode2: use the set parameters with
completely automatic adjustment without
the automatic "position" adjustment.
Mode3: use the set parameters with
completely automatic adjustment without
the automatic "frequency" adjustment.
Adjust horizontal picture resolution (most
important parameter)
Adjust vertical picture resolution (most
important parameter)
Adjustment of total number of pixels in a
line (most important parameter)
Adjust number of pixels from H-Sync
start up to beginning of picture
Adjust number of lines from V-Sync start
up to beginning of picture
The set timing parameters are activated
Display of a test pattern
Display of firmware version and data of
currently applied video source
A5E00316182-003
09.08