Osd Menu Functions - Siemens SCD 19101 D Betriebsanleitung

09.08
6.3.5

OSD menu functions

• Call the OSD menu using the MENU key
Main menu
Picture 1
advanced
Hochauflösendes 19" Color Flat Panel Display SCD 19101 D/DT
A5E00316182-002
Function Adjustment/range
Brightness 0 ... 100 using adjustment keys
(+/-)
Contrast 0 ... 100 using adjustment keys
(+/-)
Backlight 0 ... 100 using adjustment keys
(+/-)
H position 0 ... 100 using adjustment keys
(+/-)
V position 0 ... 100 using adjustment keys
(+/-)
Phase 0 ... 31 using adjustment keys
(+/-)
Frequency 950 ... 1050 (depends on
picture) using adjustment keys
(+/-)
Focus 1, 2, 3, 4, 5
Gamma Linear or CRT
Color 6500 – 7300 – 9300 – VAR
temperature
instruction manual
Description
Adjustment of brightness
This allows darker picture areas to be
seen more distinctly.
Adjustment of contrast
This allows brighter picture areas to be
seen more distinctly.
Adjust brightness of display backlighting
The total brightness of the display can
be adapted to the room illumination.
Shift picture in horizontal direction
Shift picture in vertical direction
Adjust phase of input signal
Adjust frequency of input signal
Selection of picture focus using one of
the five filters. 1=sharp and 5=smooth
Correct gamma curve
Applied color values are multiplied by a
certain factor and passed on to the
display.
Set desired color temperature or hue
Three fixed color temperatures and one
freely adjustable temperature are
available.
If "VAR" is activated, three adjustment
bars are displayed R, G and B. Setting
range: 0 ... 100%
(50% corresponds to factor 1).
41