Siemens SCD 19101 D Betriebsanleitung Seite 32

09.08
Caution
Failure to observe the warnings may result in substantial damage to
property.
Provide sufficient heat dissipation
Slots are provided on the housing base, the top of the cover and the rear panel.
The display must be placed or secured on a hard, level surface at least 10 cm from
the wall and 15 cm away from other devices. Several displays can be butt-mounted
horizontally and vertically.
The permissible ambient temperature range (5 °C to 40 °C) must not be violated
Do not subject device to unnecessary shocks.
Take care when transporting! Use the original packaging! The panel in particular
should be protected against shocks.
When touching the panel surface, the mechanical contact or an electrical discharge
may cause a brief disturbance in the picture quality.
Care of unit / cleaning agents
-
The front panel is extremely sensitive to mechanical damage. Avoid all
scratches, knocks etc.!
-
Remove water drops immediately; extended contact with water discolors the
surface.
Clean the front panel when dirty using a microfiber cloth and, if necessary, a glass
cleaning agent*. Only clean housing parts using a cleaning agent for plastics*.
* Note:
Do not use cleaning agents containing solvent, e.g. petroleum spirit!
Hochauflösendes 19" Color Flat Panel Display SCD 19101 D/DT
A5E00316182-002
instruction manual
31