Siemens SCD 19101 D Betriebsanleitung Seite 43

Instruction manual
Main menu
Options 1
Options 2
42
Function Adjustment/range
OSD Selection between nine fixed
OSD positions
OSD H position 0 ... 100 using adjustment keys
(+/-)
OSD V position 0 ... 100 using adjustment keys
(+/-)
OSD duration 5 ... 60 seconds
OSD Opaque–transparent
background
Noise ON – OFF
suppression
DPMS ON – OFF
Signal search OFF – ON – Standard
Deletion color Red – Green – Blue – Black
Display 1280 x 1024
Info signal On – Off
source
Hochauflösendes 19" Color Flat Panel Display SCD 19101 D/DT
Description
Select OSD position
Shift OSD menu in horizontal direction
Shift OSD menu in vertical direction
Adjustment of time after which the OSD
menu is automatically canceled if no key
is pressed
The adjustment is made between 5 and
60 s in steps of 5 s.
Select background color of OSD menu
You can select either a transparent or
opaque background.
Only activate with picture interferences !!
Default setting: OFF.
With ON: activation of function for
suppression of noise in the
synchronization signals. Prevents a new
picture adjustment (display of picture
background) in the event of brief
interferences.
If no positive effect: Set OFF. Problems
are to be found in the signal source /
cables.
Switch Display Power Management
System (DPMS) on or off
If the DPMS is activated, the monitor
switches to the power down mode as
soon as no more synchronization signals
are present, i.e. the screen becomes
dark.
Select video sources
Standard setting: ON
Selection of background color for screen
if no input signal is present
Nominal resolution (for information
purposes only)
Switch signal source display on or off
If there is a change in one of the
following settings, the signal source
display appears briefly on the screen
with the current signal source
information:
Signal source (e.g. RGB Analog)
Mode (number of entry in internal timing
table)
Resolution of input video source
H- und V- FrequenzH and V frequencies
A5E00316182-003
09.08