Safety Precautions - Siemens SCD 19101 D Betriebsanleitung

Instruction manual
2

Safety precautions

Perfect, safe and reliable operation of the equipment assumes that it has been
professionally transported, stored, mounted and installed as well as careful
operator control and service. The units must only be used for applications for which
monitors are normally used. The information in the Section "Technical data" must
be observed exactly.
For the sake of safety, the following precautions must be observed:
Danger
!
There is a danger to life if the warning information is not observed.
Severe personal injury or damage to property may occur.
Do not open the unit yourself
Certain components inside the units are at high-voltage, i.e. touching these
components presents a danger to life!
Only use a perfect power supply cable
A damaged power supply cable may result in a fire or electric shock. When
disconnecting the power supply cable, always do so by holding the plug.
Disconnection from the power supply
The mains plug is used for safe disconnection from the power supply. The socket
must be located close to the monitor and be easily accessible.
Do not insert any objects into the housing
Objects inserted into the housing may result in damage to the unit or personal
injury.
Do not place any objects on top of the units
Penetrating liquids may result in a fire or electric shock.
30
Hochauflösendes 19" Color Flat Panel Display SCD 19101 D/DT
09.08
A5E00316182-003