Safety Warnings - Rehau RAUTOOL M1 Bedienungsanleitung

RAUTOOL M1

sAFeTy wARnings

The tool is intended to be used with original REHAU supplementa-
ry sets for machining all REHAU sliding sleeve systems in the size
range of 16 – 40 mm .
Read all safety warnings and assembly instructions before using
the tool .
Follow these operating instructions and always keep the safety
warnings with the tool .
In addition to the operating instructions, always observe generally
applicable statutory and other binding regulations relating to the
prevention of and protection against accidents .
General safety warnings:
1. Keep your workplace tidy and free of obstructions. Make sure there
is always sufficient light.
2. Keep children, pets and unauthorised pesons away from the place at
which you are working.
3. Wear suitable work clothing. Do not wear loosely fitting clothes or
jewellery. They may get caught in moving parts. Wear a hairnet if
you have long hair. Use goggles.
4. Do not touch the moving parts (risk of finger pinching).
5. Be alert. Only use the tool if you have received instruction in using it.
6. Keep your tools in a safe place. When not in use, tools should be
kept in dry, closed rooms out of the reach of children.
7. The tool is suitable for preparation of REHAU compression sleeve
joints only. Do not use tool for other purposes.
8. Only operate the tool with original REHAU parts and accessories.
9. Maintenance and repair work should be done only in a REHAU
authorized service center. We will not be responsible for any work
performed by an unauthorized person. The addresses of authorized
service centers can be found in the attachment or they can be obtai-
ned from your REHAU sales office.
REHAU will not accept any liability for damage or injury attributab-
le to unsafe product use, poor maintenance or improper product
or system usage .
For planning and assembly kindly use our current Technical
Information brochure . You can obtain the up-to-date brochure
from your wholesale dealer, your REHAU sales office or by down-
loading from www .rehau .com .
19