Product Description - thyracont VSP63D Betriebsanleitung

32
2.3

Product Description

The VSP vacuum transducer is measuring total gas pressure in the range of
1000 - 1x10 mbar.
-4
Transducer type VCP with Pt/Rh filament is suitable for many applications with
corrosive gases in the range 1000 - 5x10
The transducer can be connected to Thyracont display and control units or to
customer related power supply and evaluation units in compliance with pin
assignment. The analog output signal 1.5V - 8.5V of VSP and 2.2V - 8.5V of
VCP, respectively, has a logarithmic dependence on pressure over the whole
range.
In addition the device has a serial RS485 interface for digital data transfer (see
chapter 5.1).
The transducer is equipped with a metal-sealed sensor type Pirani and
temperature compensated. It can be mounted to suitable flange connectors.
Proper Use
VSP and VCP serve exclusively to provide absolute pressure measurements in
gaseous media in the range 1000 - 1x10
(VCP). They may only be connected to components specifically provided for
such purpose.
Improper Use
The use for purposes not covered above is regarded as improper, in particular:
the connection to components not allowed for in their operating instructions
-
the connection to components containing touchable, voltage carrying parts.
-
No liability or warranty will be accepted for claims arising from improper use.
The user bears the responsibility with respect to the used process media.
VSP-de-171005
VSP: The device is not designed for use in corrosive gas at-
mosphere. Aggressive media such as halogenides, carbon or
oxygen plasma can reduce sensor life-time!
VCP: Aggressive media such as fluorides can reduce sensor
life-time!
Dust, oil or condensing vapours will affect sensor performance
and may cause malfunction!
mbar.
-4
mbar (VSP) and 1000 - 5x10
-4
mbar
-4