Safety Instructions Relating Specifically To The Equipment - MEISTER CRAFT MET 25-32 Originalbetriebsanleitung

MC-5459530-Bediene-4er.qxd
e Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool's operation. If damaged,
have the power tool repaired before
use. Many accidents are caused by
poorly maintained power tools.
f Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
g Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking into
account the working conditions and
the work to be performed. Use of
the power tool for operations different
from those intended could result in a
hazardous situation.
5 Service
a Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This
will ensure that the safety of the
power tool is maintained.
b To avoid hazards, damaged power
leads must be replaced by the
manufacturer or his customer service
representative.
6 – Safety instructions
relating specifically to
the equipment
• Always assume that the tool
contains staples. Careless handling
of the stapler can lead to staples
being fired off unintentionally and
causes injuries.
44
21.09.2009 11:49 Uhr
• Never turn the tool on yourself or
• Only activate the tool when it is
• Unplug the tool from the power
supply if a staple is trapped in the
tool. When removing the trapped
staple, the stapler may be triggered
accidentally if it is still connected to
the power.
• Be careful when removing a
trapped staple. The mechanism may
be under tension and the stapled may
suddenly shoot out when you attempt
to release it.
• Never use the stapler to secure
electrical cables. It is not designed
for securing electrical cables and is
capable of damaging the insulation of
the cables and thus causing electrical
shock or a fire.
• Pull out plug before loading staples.
• Switch the appliance off before
inserting plug into socket.
• Ensure that the power cable is well
away from the appliance.
• Do not touch touch-sensitive switch.
• Never point appliance at people or
animals! Staples or nails fired at close
range may cause serious injury.
• Use only appropriate staples.
Seite 44
on other people. Unexpected
triggering with discharge the staples
and cause injuries.
pressed up firmly against the item
you are working on. If the tool is not
in contact with the work piece, the
staples may miss their target.