Display - Wohler FA 410 Bedienungsanleitung

+
+
4.3

Display

After the fan anemometer is powered on, the whole of the display is briefly filled with all
possible values.
Top part of display
Up key
·
·
·
·
Down key
·
·
·
Deactivate Auto-Off function.
Access Calibration mode
+
Fig. 3: Fully display
The display is structured as follows:
Displays flow velocity, relative humidity, CO
ue (Wöhler FA 430 only), measurement duration
in Average value mode.
Toggle between readings displayed in the top
part of the display (Wöhler FA 430 only)
Press and hold: Access the Average value
mode (AVG)
In the Average value mode (AVG): Display
average value and return to normal Measuring
mode
In the Setup mode: Select a parameter and
increase a value
Toggle between readings displayed in the
lower part of the display
In the Average value mode (AVG): Display the
average values of all measured quantities
In the Setup mode: Select a parameter and
lower a value
Design and function
2
val-
EN
41