Troubleshooting - SOLIS KE 1303 Typ 5514 Bedienungsanleitung

s TROUBLESHOOTING
Problem
Appliance does not
function
The appliance can not
be switched on
Some functions can
not be activated
The appliance makes
loud noises during the
heating phase
Brewing tea takes lon-
ger than usual
The tea is too strong
or too weak
118
Possible cause and solution
– Is the power plug connected to the power outlet?
– Check if the power socket is connected to the power
with another electrical device.
– Check if power cord or power plug are damaged. If yes,
do not use the appliance but bring it to a Solis service
centre.
– Check if the glass jug is correctly positioned
on the appliance base.
– Once a function button has been pressed and the hea-
ting up phase has begun, the other buttons can not be
operated anymore. Exception: The START/STOP button.
An exception to this rule is the warm-keeping function
(see page 112 of this manual).
– If you wish to change a program, you either have to
elapse the currently activated program or press the
START/STOP button for 2 seconds to prematurely quit
the program.
– The appliance is calcified. Descale the appliance as
described.
– The appliance is calcified. Descale the appliance as
described.
– Tea taste is highly individual.
– If the tea is too weak, increase the amount of tea leaves.
– If the tea is too strong, use less tea leaves resp. remove
the tea strainer from the jug right after the steeping time
has elapsed.