SOLIS KE 1303 Typ 5514 Bedienungsanleitung Seite 111

s HEATING THE WATER TO A PRESET
TEMPERATURE RESP. BRINGING IT TO
THE BOIL
With your Solis Tea Kettle Classic, you can simply heat water to one of the
4 temperatures resp. bring water to the boil.
•
Place the water-filled jug without the tea strainer on the appliance base. The
outside of the jug and the appliance base have to be dry, the lid has to be closed.
• Plug the power plug into the power outlet. For a short moment, all button sur-
rounds light up in blue, after that, only the button surrounds of the START/STOP
button and the GREEN TEA button will light up.
•
Press a tea program resp. a button if you wish to heat water to the corresponding
temperature (75°/85°/90°/95°/100°). The blue button surround lights up around
the button.
•
After that, press the START/STOP button, its button surround lights up in red and
the heating up process starts.
•
Once the desired temperature has been reached, a fivefold signal sounds and
the button surround of the selected program button flashes.
• If you have chosen the 100°/BOIL button, the appliance automatically
switches to the warm-keeping function for 30 minutes after completing the
boiling phase. The blue button surround of the 100°/BOIL button flashes slowly.
• If you have chosen another temperature (75°/85°/90°/95°), and wish to acti-
vate the warm-keeping function, you have to press the previously chosen
program button for at least 2 seconds while the blue button surround is
flashing. A sixfold signal sounds and the warm-keeping function is activated
for 30 minutes. The flashing intervals of the button surround change to slower
flashes.
• If you wish to stop the program during the heating up phase, you can do this at
any time by pressing the START/STOP button for at least 2 seconds until a signal
sounds and the button surround of the START/STOP button changes to blue.
111