Before You Start - Elinchrom RQ Ringflash ECO Gebrauchsanleitung

Before You Start

Ranger Quadra AS and the RQ Ringflash ECO are portable units, which will be frequently used
«on location». Please be aware of the danger, or inconvenience, which it may represent to
others for example children.
• Connect the flash cable with the security locking ring first to the RQ RF ECO and
• Ensure that the RQ power pack is switched OFF.
• Only correct fitted flash cable connections are secured against arching, moister and
• Power pack outlets not in use must be protected with the security covers.
• Check all connections again; the cable must be locked with the security ring and
• Now adjust / align the camera and start your lighting experience.
Attention
• Always switch off the unit before connecting or disconnecting the RQ Ringflash ECO!
!
• The ambient temperature whilst charging: min. 0°C (32°F) up to max. 40°C (104°F)
• The ambient temperature whilst the unit is in use: min. -20°C (-4°F) up to max.
Third party manufacturers
Even, similar flashhead sockets and plugs are used by other manufacturers, the Ringflash
cannot be connected to generators from these manufacturers. Ask your Elinchrom service if
suitable adapter cords for those brands exist.
RQ Ringflash ECO Characteristics
• Up to 400 ws maximum flash power, for the Ranger Quadra RX Battery power pack.
• Detachable high quality flash cable for maximum power and flexibility, available in 1
• Included reliable quality 2-pole flash tube with internal reflector and transparent
• Included white diffuser cap to modify the light characteristics into a semi diffuse light
• Included camera bracket to fit a wide range of cameras.
6
than to the RQ power pack.
dust.
than switch on the unit.
40°C (104°F)
m / 2 m standard / 5m / 10 m.
plastic protection.
source.