iSi Cream Profi Whip Gebrauchsanleitung Seite 22

During operation, gas is leaking between the
bottle and the head.
1. The head gasket is missing.
2. The head gasket has been damaged.
3. The head was not tightened securely.
4. The bottle has been damaged on the upper
Service.
Replacement parts are available individually
and at an affordable price.
See your specialist dealer for the availability of
replacement parts. In Austria, you can also get
in contact via info@isi.com. In the US contact
isinorthamerica@isi.com
Only send in the complete whipper for repairs.
Replacement parts can be seen in greater detail
on the expanded drawing.
47026405_CPW_GA_kurz.indd 15
"Release the pressure" and insert the
head gasket into the head.
"Release the pressure." The head gasket
needs to be replaced and is available as
an original iSi spare part.
Tighten the head onto the bottle by hand
as per the instructions.
edge.
"Release the pressure" and send the
whipper to iSi or a service center.
15
EN
08.11.18 17:17