Activate Autohold Function - Seca 285 Bedienungsanleitung

Activate Autohold
function (AHold)
NOTE
If you enter the value "0", the function is
switched off. The "PT" message is no longer
displayed.
3. Confirm your selection.
The set additional weight is displayed (here 4 kg)
with a minus sign in front of it.
4. Ask the patient to step onto the scales.
The patient's weight is displayed.
The additional weight saved has been deducted
automatically.
5. To disable this function, re-select the "Pt" item from
the menu.
6. Confirm your selection.
The set additional weight is no longer displayed.
The function is disabled.
If you activate the Autohold function, the measured
result for each weighing operation continues to be
displayed after the load has been removed. This means
you no longer have to manually activate the Hold
function for every weighing operation.
NOTE
Whatever setting is selected here, in the 2 in 1
function the child's weight is always determined
with Autohold.
1. Select the item "AHold" from the menu.
2. Confirm the selection.
The current setting is displayed.
3. Select the setting you require:
– On
– Off
4. Confirm your selection.
You will leave the menu automatically.
English
Operate scales • 101