Fitting The Strap; Switching On The Collar; Switching Off The Collar - Num'axes CANIBEEP PRO Gerbrauchsanleitung

Fitting the strap



Switching on the collar


Before using the collar, be sure you properly tighten the 4 screws on the top in order to maintain
the watertightness of your product.
To switch On your CANIBEEP PRO collar touch the magnetic switch position indicator with the
magnetic key for at least one second. The magnetic switch position indicator is located at the
back of the collar (under the NUM'AXES logo - see Diagram 4).
The collar will emit two low pitch beep sounds and the red indicator light will flash briefly
indicating the CANIBEEP PRO is On. Move the magnetic key away.

Switching off the collar


To switch Off your CANIBEEP PRO collar touch the magnetic switch position indicator with the
magnetic key for at least one second (see Diagram 4).
The collar will emit one low pitch beep sound and the red indicator light will flash briefly
indicating the CANIBEEP PRO is Off. Move the magnetic key away.
GB - 22
Diagram 3

Diagram 4

