Technical Specifications; Intended Use; General Safety Guidelines - EUROM Vento 3 Anleitungsbroschüre

BEFOREHAND
Read this instruction manual thoroughly and carefully before use and keep it for future
reference.

TECHNICAL SPECIFICATIONS

Model
Ø blades
Dimensions
Weight

INTENDED USE

The stove fan is intended to be used on top of free-standing stoves and cookers with a normal
works to a certain degree, and it is therefore important to not exceed the temperature limit.

GENERAL SAFETY GUIDELINES

 This device is only for indoor household use.
 Always ensure that the floor is sturdy, flat and horizontal.
 Check that the fan blades are assembled correctly before use. Tighten using a hex key, if
necessary.
 Never place the product on unprotected surfaces, especially when it is hot, it may damage
the surface.
 Check that the stove fan handle is in the vertical position before putting it on the stove.
 Store out of the reach of children. Keep the machine under careful supervision when it is
used by children, or near children or pets.
 Never leave the product unattended when running.
 The stove fan gets hot when in use – risk of burn injuries. Always use the handle to move the
fan, and do not touch the base of the stove fan.
 Never attempt to cool the fan quickly, for example by immersing it in water – this will damage
the fan.
 Never put a finger, pen or any other object between the blades of the functioning fan!
 Keep your hair, clothing. jewellery and similar objects away from moving parts.
 Carry the product by the handle.
Kamin Vento 3
16 cm.
16 x 9,5 x 22,5 cm.
0,54
surface temperature of 65–300°C to save fuel and enable the efficient
distribution of heat in the room.
The stove fan does not run on the mains or batteries; it uses the heat
from the stove or cooker to run the fan. The unique design of the fan
gives stable and silent operation.
Place the fan on top of the stove in such a way that cool air is drawn
over the cooling frame. Do
not place the fan on the front of the stove or immediately in front of the
chimney; then the cooling frame becomes too hot!
If the surface temperature exceeds 300°C, move the fan to a position on
the stove or cooker that has a lower temperature, this is to prevent
damage to the fan. Use a thermometer designed for high temperatures.
The base is designed so that it "lifts" when the temperature gets too
high, and in doing, so reduces the contact with the surface. This is to
avoid damage to the fan that can occur at high temperatures. This
8
EN