Baninni ROADTRIP BN513 Gebrauchsanleitung Seite 19

Group I( 9-18KG) : The adult belt should pass through the
top hook!
Step 4. Press your knee on the child car seat and pull the diagonal belt
along the direction as the picture shows (Fig.4 - Fig.6). Make sure that belt
has not loosened. Tighten the diagonal shoulder belt in the direction of
the automatic roll-up as possible.
The satisfactory position of the adult safety-belt buckle relative to the child
car seat is as the Fig 7.
You can contact the child car seat manufacturer if in doubt about this
point.
To release your child seat following the above instructions in reverse order.
Ensure that each part of the belt is tightened as possible.
Make sure all the belts` position is right and has not become twisted.
Also check that the cover is not impeding the movement or fit of the belt
webbing in any way.
When installing the child car seat (Group I), In no way should you use the
head belt guide (group II III ) in the head rest.
fig.4
fig.6
fig.5
fig.7