Baninni ROADTRIP BN513 Gebrauchsanleitung Seite 17

If the height of your shoulder belts in child car seat is not fit for your child, adjust the
height of the shoulder belts, please proceed as follows:
Step1. Loosen the shoulder harness (see
point 4.3). Turn the child seat to the
back, Slide the chest belt off the harness
connector (Fig. 1).
Step 3. Now thread the small belts of
the chest pads and harness into the
corresponding belt slots. Slide the harness
straps in the harness connector (Fig 3)
fig.1
Step 2. Slide both of the shoulder harness
off the harness connector (Fig. 2).).
fig.3
Step 4. Slide both of the chest pads in the
chest pad connector (Fig 4)
Ensure that both of the shoulder belts and
chest belt go through slots at the same
height, and not twisted.
fig.2
fig.4