Baninni ROADTRIP BN513 Gebrauchsanleitung Seite 18

MANUAL
5.2 Securing the child car seat (group I)
Step 1. Place the child safety seat on the
vehicle's seat which is fitted with 3-point
safety belts, ensuring it is firmly pressed
against the car seat's backrest (Fig. 1).
fig.1
Step 2. Pull out the vehicle belt, thread
the belt tongue (incl. vehicle belt) through
the adult belt route slot to the rear and
through the back rest, through the other
adult belt route slot (on the buckle side),
and allow it to lock in place. You will hear
"click" (Fig. 2)
Step 3. Place the vehicle lap belt under
the arm rest. Note: Pull the vehicle
diagonal belt on the vehicle buckle side
through the car seat belt route slot and
the vehicle lap belt under the arm rest.
Make sure adult belt has been clipped
fig.3
fully and not become twisted (Fig. 3).
De hoofdsteun kan aangepast
worden in 7-8 standen al naar
gelang de grootte van het kind.
Zoals te zien op de tekening,
draait u de stoffen bekleding
om. Hef vervolgens de rode
hendel omhoog en terwijl u
de hoofdsteun naar boven of
beneden schuift om de hoogte
aan te passen. De hoogte van
de schouderriemen zal daarbij
ook veranderen.
fig.2