Expolite Tour-PAR COB 200 Bedienungsanleitung Seite 22

Fading: Fades between the single steps.
Jumping: Is just jumping through the steps, without fading.
For Fading and Jumping it is possible to control the speed (0 - 255) and to add a strobe.
Sound: In the submenu Sound the Sound to Light-Control can be activated. It is also possible to set
the sensitivity of the reaction to acoustic signals (00 - 99).
Miscellaneous Settings
MENU
Settings
PERSON
Display: In the submenu Display the display illumination can be set to turn off automatically approx.
one minute after entering the last setting (Off) or to stay illuminated generally (On).
.
DMXfail: sets how the fixture responses if DMX-signal gets lost. Set Hold to hold the last received
value or Blackout for blackout.
DimCurve: In the submenu DimCurve, it is possible to choose different dimmer curves. Every curve
activates a different dimmer delay, as shown below.
Linear
DimRespe: the submenu DimRespe sets if the dimmer of the led responses immediately to changes
(LED) or with a slight delay as a halogen bulb (Halogen).
WhiteBal: In the submenu WhiteBal a custom colour calibration is stored which limits the maximum
brightness of the colour channels RGBW at the DMX value "255".
NOTE: The maximum value can be limited to 0. In this case, a colour channel does not respond
to a sent DMX value, which can be misinterpreted as a device error.
Display
HSIC On
Off
HSIC DMXfail Hold
Blackout
DimCurve HSIC Linear
Exp
Log
S-Curve
DimRespe Halogen
HSIC
LED
Red
WhiteBal HSIC
Green
Blue
White
Regular
HSIC FanSet
Silent
HSIC Test Off
On
FacReset HSIC Off
On
Exp
0 - 255
0 - 255
0 - 255
0 - 255
Log
E-22
S-Curve