Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
you always use rinse aid for best drying
performance.
If you use standard detergent or multi-
tablets without rinse aid, activate the
notification to keep the rinse aid refill
indicator active.
How to deactivate the rinse
aid empty notification
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
the indicators
start to flash and the display is blank.
2. Press
• The indicators
off.
• The indicator
flash.
• The display shows the current
setting:
notification is activated (factory
setting).
3. Press
= the rinse aid empty notification is
deactivated.
4. Press the on/off button to confirm
the setting.
6.5 Acoustic signals
Acoustic signals sound when a
malfunction of the appliance occurs. It is
7. OPTIONS
Desired options must be
activated every time before
you start a programme.
It is not possible to activate
or deactivate options while a
programme is running.
and
,
,
and
.
,
and
continues to
= the rinse aid empty
to change the setting.
not possible to deactivate these acoustic
signals.
There is also an acoustic signal that
sounds when the programme is
completed. By default this acoustic
signal is deactivated but it is possible to
activate it.
How to activate the acoustic
signal for the end of
programme
The appliance must be in programme
selection mode.
until
1. To enter the user mode, press and
hold simultaneously
the indicators
start to flash and the display is blank.
go
2. Press
• The indicators
off.
• The indicator
flash.
• The display shows the current
setting:
3. Press
= Acoustic signal on.
4. Press the on/off button to confirm
the setting.
Not all options are
compatible with each other.
If you have selected non
compatible options, the
appliance will automatically
deactivate one or more of
them. Only the indicators of
the options still active will
stay on.
ENGLISH
and
,
,
and
,
and
continues to
= Acoustic signal off.
to change the setting.
11
until
go
Werbung
Inhaltsverzeichnis
