Hendi 274149 Gebrauchsanweisung Seite 10

1.4. Removing the tap
Removing the tap is prohibited if the bowl contains the product or any other liquid.
EN
1.5. Cleaning the pan
10
• Place the bowl on a flat surface and using both
hands, remove the gasket by sliding it upwards in
the direction shown by the arrow.
To remove the tap, proceed as follows:
• move the rod to the maximum dispensing posi-
tion;
• Press with some force to push the shaft (A) and
then remove the tap (B) with both hands, as illus-
trated in the figures;
It is necessary to remove all parts fitted to the pan.
• Remove any product left in the bowl, see para-
graph 1.2;
• Remove the bowl from the machine, see para-
graph 1.3;
• Remove the tap from the machine, see paragraph
1.4;
• Clean the entire surface of the pan using a damp
cloth and/or a non-abrasive sponge;
• Clean the channel connecting the bowl and the
tap, using a cleaning brush (not supplied), as il-
lustrated in the figure;