Troubleshooting Table - Privileg EC1720BC-GS Gebrauchsanleitung

Troubleshooting table

Malfunctions can occur in all electrical appliances. This does not nec-
essarily mean there is a defect in the appliance. For this reason, please
check the tables to see if you can correct the malfunction.
WARNING
Risk of electric shock in case of improper repair!
Never attempt to repair the defective or supposed defective
appliance yourself. You can put your own and future users'
lives in danger. Only authorised specialists are allowed to carry
out this repair work.
Problem
The mains plug
is connected but
the soleplate (5)
is cold.
No steam is
emitted from the
soleplate (5).
The steam shot
button (1) is not
working.
Possible cause
The socket has no
power.
The temperature
is set to the lowest
"MIN" level.
Not enough water in
the water tank (11).
The temperature is
set too low.
Not enough water in
the water tank (11).
The temperature is
set too low.
The function is be-
ing used for the first
time.
Troubleshooting table Page EN-25
Solutions, tips
Check the fuse. Use an-
other socket.
Set a higher temperature
using the temperature con-
trol dial (3).
Fill the water tank up to the
"MAX" mark.
Set a temperature within
the black range using the
temperature control dial (3).
Fill the water tank up to the
"MAX" mark.
Set a temperature within
the black range using the
temperature control dial (3).
Push the steam shot button
several times in a row until
steam is emitted.