Winding The Steam Pipe And Power Cord; Ironing Tips - Privileg EC1720BC-GS Gebrauchsanleitung

Page EN-20 Operation
Winding the steam
pipe and power cord
If you are no longer using the
steam generator iron and you
would like to store it away, you
can wind the steam pipe and the
power cord around the steam
generator.
1. Pull the cable guide (8) out
so it protrudes approximately
1.5 cm from the steam gener-
ator iron (b).
2. Wind the power cord an-
ti-clockwise around the chan-
nel around the base of the
steam generator iron.
3. Also wind the steam pipe
around the channel around
the base of the steam gener-
ator iron.
4. Fix the mains plug, the power
cord and the steam pipe by
pushing in the cable guide
again.
You can now store the steam gen-
erator iron away.

Ironing tips

Basic tips
– Take the laundry off the clothes
– Smooth down the laundry and
– Do not set the iron temperature
– As the steam iron warms up
– For blouses, shirts, trousers
– Always iron the large areas last.
– Iron evenly and not too quickly.
(8)
line while it is still damp or set
your clothes dryer to "iron dry".
iron it quickly.
any higher than indicated on the
care label sewn onto the textile.
Check whether the ironing tem-
perature is suitable by testing
the iron on a concealed part of
the garment. This ensures you
do not immediately ruin the gar-
ment if the temperature setting
is too high.
faster than it cools down, you
should always iron garments to
be ironed at temperature set-
ting ● first.
and dresses, iron the hard to
reach areas on both sides first:
– button facing,
– cuffs,
– collar,
– pockets.
Hectic strokes when ironing will
push the fabric together some-
what and may produce more