oventrop Regusol X-Uno 25 Montage- Und Bedienungsanleitung Seite 79

7.1 Removal
WARNING!
Risk of injury if incorrectly dis-
manteled!
Stored residual energies, angular
components, points and edges at
the outside and inside of the
appliance may cause injuries.
For this reason:
– Before starting work, make sure
that there is enough space.
– Open and sharp-edged compo-
nents are to be handled with care.
– Please make sure that the working
place is tidy and clean Loose com-
ponents and tools lying around are
hazardous.
– Components are to be dismantled
professionally.
Before starting removal:
Switch off appliance and secure against re-
start.
Separate physically all power supply from the
appliance and discharge stored residual ener-
gies.
Remove working and auxiliary material as well
as remaining processing materials and dispo-
se environmentally friendly.
Removal and disposal
7.2 Disposal
If no return or disposal arrangements have been
made, dismantled components are to be recy-
cled:
Metals are to be scrapped.
Plastic parts are to be recycled.
Depending on the material they are made of,
other components are to be disposed of
accordingly.
ATTENTION!
Ecologically harmful if incorrectly
disposed of!
Electrical waste, electronic compo-
nents, lubricants and other auxiliary
materials are dangerous waste and
must only be disposed of by spe-
cialised companies
The local municipal authority or specialised dis-
posal companies give information on environ-
mentally friendly disposal.
79