Installation
5.3.2 "Regusol X-Duo 25"
Connect supply pipes according to the following
scheme:
Using G 1 compression fittings:
1
Solar circuit supply
2
Solar circuit return
G 1 flat sealing:
3
Storage cylinder circuit return
4
Storage cylinder circuit supply I
(storage cylinder loading:
storage cylinder with loading
operation section by section at the top,
loading of two storage cylinders
storage cylinder 1)
5
Storage cylinder circuit supply II
(storage cylinder loading:
storage cylinder with loading
operation section by section at the bottom,
loading of two storage cylinders
storage cylinder 2)
NOTE!
Suitable sets of compression fittings
for the solar circuit and tailpipe sets
for the storage cylinder circuit are
available as accessories and are to
be ordered separately.
When using compression fittings
with soft or thin walled pipes, rein-
forcing sleeves are to be used for
the additional stabilization of the
pipe.
66
Illustr. 20: Connection of supply pipes