oventrop Regusol X-Uno 25 Montage- Und Bedienungsanleitung Seite 62

Installation
5 Installation
5.1 Preparations
Before installation of the solar station:
1. Determine the positioning of the solar station
taking the required space for the expansion
tank into consideration.
2. Determine positioning and route of all supply
and return pipes to the solar station.
WARNING!
Danger to life!
Improper installation may lead to
extensive injuries to persons and
damage to property.
For this reason:
– Installation should only be carried
out by a qualified electrician.
– Before starting work, please ensu-
re that all components are dis-
connected from power supply.
Ensure that a suitable sized fused power
3.
supply is available. Have the installation car-
ried out by a qualified electrician according to
relevant current standards.
4. Place required tools ready:
Tape measure
Spirit level
Pipe wrench
Drill (with 10 mm masonry drill bit)
Spanner 13 mm/reversible ratchet handle
with 13 mm socket
Cutter
62
Illustr. 16: Installation, indications in mm