Herunterladen Inhalt Inhalt Diese Seite drucken

Working With The Kneading Hook, Beater And Whisk - Silvercrest SKMP 1300 B3 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für SKMP 1300 B3:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Working with the kneading
hook, beater and whisk
WARNING! RISK OF INJURY!
Under no circumstances should you place
your hands or fingers in the mixing bowl 6
during operation! Danger of injury due to
rotating parts!
Switch from one accessory to another only
when the drive unit is at a complete standstill!
After being switched off, the drive continues
to run for a short time .
In cases of malfunction, switch the appliance
off and remove the plug from the wall socket .
This will prevent the appliance from becoming
switched on again unintentionally .
CAUTION – PROPERTY DAMAGE!
When working with kneading hooks 0,
whisk q or beater w, we recommend
allowing the appliance to cool down after
10 minutes of operation .
NOTE
When you are working with the kneading
hook 0, whisk q or beater w, the drive unit
lid u must be in place . If not, the appliance
will not start .
To prepare the device for tasks involving the knead-
ing hooks 0, whisk q or beater w, proceed as
follows:
1) Push the release lever 2 upwards and move
the swivelling arm 1 to the highest position .
2) Insert the mixing bowl 6 so that the locking
mechanisms on the mixing bowl 6 fit into the
recess in the base 5 . Rotate the mixing bowl 6
clockwise (cf . symbols
base 5) until it is locked and stable .
SKMP 1300 B3
and
on the
3) Depending on type of application, mount either
the kneading hook 0, whisk q or beater w
onto the drive shaft 7:
Place the kneading hook 0, whisk q or
beater w onto the drive shaft 7 so that
both metal pins on the drive shaft 7 fit into
the recesses in the inset 0 q w .
Push the inset 0 q w firmly onto the drive
shaft 7 until the spring is compressed while
rotating the inset a little anticlockwise (direc-
tion
) .
Let go of the inset . It is now firmly attached
to the drive shaft 7 .
4) Add the ingredients into the mixing bowl 6,
observing the following table with the recom-
mended filling quantities:
Filling quantities for . . .
Yeast dough
Cake mixture
Heavy dough
(e .g . shortcrust pastry)
Cream
Egg white
(eggs of weight class M)
Adjust the remaining ingredients in the recipe
to the respective maximum quantity .
min .
max .
1000 g
N/A
flour
900 g
N/A
plain
flour
900 g
N/A
plain
flour
200 ml
1500 ml
2
12
 23
GB

Quicklinks ausblenden:

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis