IFM Electronic ecomat100 CR0301 Montage- Und Installationshinweise Seite 16

C C CR0301
ABINET ONTROLLER
CR0301
Digital outputs
X3:01...04, OUT 00...OUT 03
can be configured as ...
Digital outputs
X3:06...09, OUT 04...OUT 07
Relay outputs
X5.1:01...11, OUT 08...OUT 10
Relay outputs
X5.1:13...18, OUT 11...OUT 12
X5.2:01...18, OUT 13...OUT 17
External free-wheeling diode
ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen
16
PAGE
■ Semi conductor outputs, positive switching (high side), with diagnostic capability
short-circuit and overload protected
switching voltage 10...32 V DC
switching current max. 2 A
■ PWM outputs
PWM frequency max. 250 Hz
setting resolution 0,1 %
load current max. 2 A
The outputs 0...3 are combined and have a common U
■ Semi conductor outputs, positive switching (high side),
short-circuit and overload protected
switching voltage 10...32 V DC
switching current max. 2 A
The outputs 4...7 are combined and have a common U
■ Changeover contacts, potential-free (R0...R2)
switching current 0,5...10 A (NO), 0,5...5 A (NC)
switching voltage 10...32 V DC
number of operating cycles (without load)
switching - time constant
■ Changeover contacts, potential-free (R3...R9)
switching current 0,01...2,0 A
switching voltage 10...32 V DC
number of operating cycles (without load)
switching - time constant
To protect the outputs free-wheeling diodes must be connected in parallel with the
load in the case of high switch-off energies (inductive or capacitive loads).
also see wiring, page 5
We reserve the right to make technical alterations without prior notice.
Characteristics of the outputs
COM
COM
≥ 10
6
≤ 3 ms
≥ 10
6
≤ 5 ms
connection.
connection.
CR0301 / page 4 05.11.2014