Technical Data (Data Sheets 1; Dimensions, Mechanics, Electronics - IFM Electronic ecomat100 CR0301 Montage- Und Installationshinweise

CR0301
Mobile controller
CabinetController
24 inputs
18 outputs
Programming
to IEC 61131-3
Operating voltage
10...32 V DC
Technical data
Design
Dimensions (l x w x h)
Mounting
Connections
Inputs / outputs
Operating voltage and CAN bus
Programming, TEST
Weight
Operating temperature
Storage temperature
Protection
Inputs
possible configurations
Outputs
possible configurations
Abbreviations
A = analogue
B = binary high side
H
B = binary low side
L
I = pulse low side
L
PWM = pulse width modulation
Accessories
(to be ordered separately)
ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen
X2
1
2
RS 232
1.) row of LEDs (10 segments) 2.) DIP switch (8 segments)
usable as CANopen master or intelligent I/O module
24 inputs (8 analogue / 16 digital) and 18 outputs (8 digital / 10 relay)
(for mechanical protection potted in a potting tub)
fixing via 4 bore holes (Ø 4.5 mm)
AMP crimp connector to be clipped into place and thus vibration-resistant,
protected against reverse polarity (AMP Junior Timer contacts)
– 40...85 °C (depending on the load)
Amount Signal Type
8 analogue 0...10/32 V DC, 0...20 mA or ratiometric
digital as binary voltage input
or
8 digital for positive sensor signals, with diagnostic capability
4 digital for positive sensor signals, with diagnostic capability
frequency pulse inputs, max. 30 kHz
or
4 digital for positive / negative sensor signals
Amount Signal Type
4 digital positive switching (high side)
PWM PWM frequency max. 250 Hz
or
4 digital positive switching (high side)
3 relay 1 changeover contact each, potential-free, max. 10 A
7 relay 1 changeover contact each, potential-free, max. 2 A
connector set for CabinetController, consisting of:
AMP crimp housing, 1 x 6 pins, 2 x 10 pins, 3 x 18 pins
incl. crimp contacts (Junior Power Timer)
RS 232 programming adapter for the connection of U
We reserve the right to make technical alterations without prior notice.
C C
ABINET
223
X4 X3 X5.1
LED
X1 X5.2
198
PCB without housing
223 x 134 x 33 mm
2 x 10 pins, 3 x 18 pins
1 x 6 pins
D-Sub socket, 9 pins
0.55 kg
– 40...85 °C
IP 20
24
18
order no. EC2075
order no. EC2076
B
CR0301
ONTROLLER
A
B
L
B
L
B
L
I
L
B
L/H
B
H
PWM
B
H
to the TEST input
CR0301 / page 1 05.11.2014
13
PAGE