Mounting The Electronic Display; Electrical Installation - Siko Ma503/2 Originalmontageanleitung

MA503/2
Installation

4.2 Mounting the electronic display

For panel mounting we recommend the following dimensions:
Fig. 1: Panel mounting
• Panel
• Push the display into the panel cutout until the mounting tabs snap
• Mounting tabs hold the unit, but allow easy removal, too.

Fig. 2: Mounting

4.3 Electrical installation

Destruction of parts of equipment and loss of regulation control
WARNING
` All lines for connecting the electronic display must be shielded.
` Never wire or disconnect electrical connections while they are live.
` Perform wiring work in the de-energized state only.
` Use strands with suitable ferrules.
` Check all lines and plug connections before switching on the device.
` Switch on operating voltage together with downstream electronic unit
MA503/2 · Date 05.09.2016 · Art. No. 85333 · Mod. status 151/16



must be provided with cutout for MA503/2.
1
completely.
(e. g., control unit).
English 15
Panel
1