Control Panel - Klarstein 10032863 Handbuch

EN

CONTROL PANEL

Lift hood up/down
If you press the extract button for 2 seconds, the hood begins to lift up and remain in
the highest position available. By again pressing the key, the hood retracts..
Important: Check that the core when moving in and out is not blocked or obstructed.
There is a risk that a container is lifted (handle, etc.) and possibly hot contents may spill.
Adjust the power intensity
With the Silder, you can reduce or increase the power level. To do this, eitherdirectly
touch the desired intensity level or move back and forth on the control panel (under the
illuminated stepped bar) until you have reached the desired intensity. The power level
is displayed in the display above. If you stay on the button for the maximum intensity
(slider) for longer (approx. 5 seconds), activate the intensive level (Turbo). The last level
(at the level of the pictogram) starts flashing.
Turn of the automatic delay
Press the button for three seconds. When starts to flash, the automatic delay is
activated.
26