Leckey Squiggles Bedienungsanleitung Seite 28

9.10 Contoured Headrest
Cushion
To attach the headrest cushion, place the
cushion onto the head support plate, then
snap the side and upper fasteners in place.
Bring the lower flap under the plate and snap
the two remaining fasteners in place.
The plastic reinforcement piece should be
placed between the headrest assembly and
the cushion, but should not be zipped inside
the cushion.
9.11 Flat Headrest Cushion
and Lateral Covers
To attach the flat headrest cushion, place the
cushion onto the head support plate,
then snap the central and upper fasteners
in place. The headrest lateral covers are
attached in the same way as the lateral
support padded covers.