Troubleshooting - Berkel HOME LINE SERIES Gebrauchsanleitung

Troubleshooting

The machine does not start when
the on button is pressed
the machine starts but
the operation indicator light
does not switch on
the machine does not stop
Excessive resistance to
sliding component movement
PROBLEM
When the start button is pressed,
When the stop button is pressed,
(product holder, carriage).
No power or defective
control circuit
Defective indicator light
Defective control circuit
Sliding guide lubrication
not performed
PROBABLE CAUSE
15
periodically
Check if the plug has been
Service Centre if the problem
persists
Do not use the machine with
the indicator light off. Contact a
service centre
pulling the plug out of the socket
centre
Perform periodic
lubrication
REMEDY
inserted correctly. Contact a
Immediately stop the machine by
and immediately contact a service