Measurements - CONDTROL XP4 Bedienungsanleitung

LASER DISTANCE METER
EN

MEASUREMENTS

Single distance measurement
Press Turn on the product.
Turn on laser beam. Aim the product at measured
Press
object.
Press
Take measurement.
– measuring result
Press Delete the last measuring result.
Continuous measurement (tracking)
Press and hold Activate
for 1 sec. function. Laser beam turns on simultaneously.
The product will take measurements one after
another, showing the last measured value. Besides it
will show maximal and minimal measured values.
– maximal value
– minimal value
– difference between maximal and minimal values
– current value
10
XP4 CONDTROL
User manual
continuous measurement (tracking)
LASER DISTANCE METER
EN
Stop taking measurements. The last measured values
Press or
are shown on the display .
Stake out
Activate stake out function.
Press
appears on the display.
Press or Set the value of distance А*.
Press Confirm the value of distance A.
Press or Set the value of distance В*.
Press Confirm the value of distance B.
Start taking measurements. Laser beam is blinking.
Press Move the product slowly along the stake-out line.
Arrows
in what direction it is required to move the product
in order to reach stake-out point. If sound signal is
on, when approaching the stake-out point to ±0,1
m the product emits sound signal. When reaching
the stake-out point to ±0,001 m symbol
appears on the display and sound signal tonality is
changed.
distance between the object and stake-out
point of last measured distance. This value will
increase after each next measurement by the
–
value of last taken measurement
– value of distance A
– value of distance В
– current distance to the next stake-out point
XP4 CONDTROL
User manual
Symbol
and shown on the display indicate
11