CONDTROL XP4 Bedienungsanleitung Seite 10

LASER DISTANCE METER
EN
Calculation of horizontal distance by tilt sensor
Activate function of horizontal distance calculation by
Press
tilt sensor. Laser beam is on.
appears on the display. Line 1 – tilt angle.
Press Take first measurement (hypotenuse).
Press
– tilt angle (measured)
– hypotenuse (measured)
– vertical distance (calculated)
– horizontal distance (calculated)
Calculation of distance by 2 additional measurements (Pythagoras' Theorem)
Press 2 times Symbol
Press Take first measurement (hypotenuse).
Press Take second measurement (cathetus).
– hypotenuse (measured)
– cathetus (measured)
– cathetus (calculated)
18
XP4 CONDTROL
User manual
Symbol
appears on the display.
LASER DISTANCE METER
EN
Calculation of distance by 3 additional measurements (Sum of cathetuses)
Press 3 times Symbol
Press Take first measurement (hypotenuse 1).
Press Take second measurement (cathetus).
Press Take third measurement (hypotenuse 2).
– hypotenuse 1 (measured)
– cathetus (measured)
– hypotenuse 2 (measured)
– cathetus (calculated)
Calculation of distance by 3 additional measurements
(Subtraction of 2 cathetuses)
Press 4 times Symbol
Press Take first measurement (hypotenuse 1).
Press Take second measurement (hypotenuse 2).
Press Take third measurement (cathetus).
XP4 CONDTROL
User manual
appears on the display.
appears on the display.
19