CONDTROL XP4 Bedienungsanleitung Seite 7

LASER DISTANCE METER
EN
Mark point А and go on moving the product along
stake-out line until you reach point B. If it is necessary
to transfer several equal distances, repeat the last
operation required number of times.
Press Stop the measurement.
* If press and hold or the speed is increased.
Digital viewfinder
Activate function of digital viewfinder.
Press
Aim the product at measured object.*
Press Take measurement.
- measuring result
Press or Exit the mode.
*At distance less than 20 m laser dot can be out of the cross hair on the display. It
is calibrated to distances over 20m and will be exactly in the center in the range of
20m-150m, so, it helps to aim at the object
12
XP4 CONDTROL
User manual
Addition/Subtraction
Press
Press
Press
Press
Press
Press
LASER DISTANCE METER
EN
Turn on laser beam.
Aim the product at measured object.
Take first measurement.
Measuring result appears in the main line.
or Activate addition
Turn on laser beam. First measuring result moves to
the line 2 on the display.
Take the second measurement.
– first measurement
– second measurement
– result of addition/subtraction of 2
measurements
To do addition/subtraction of more than 2 measurements press
and perform the above mentioned operations required number of times.
Exit the mode.
XP4 CONDTROL
User manual
/ subtraction .
13