Intended Use; Set; Technical Specifications - CONDTROL XP4 Bedienungsanleitung

LASER DISTANCE METER
EN
Congratulations on your purchase of laser distance meter CONDTROL XP4.
Safety instructions can be found in the end of this user manual and should be
carefully read before you use the product for the first time.

INTENDED USE

Laser distance meter XP4 is intended to measure distance, to stake out a line, to
calculate area and volume of measured objects as well as perform calculations
by tilt sensor and Pythagoras' Theorem. The product is suitable for use at both
indoor and outdoor building areas.

SET

1. Laser distance meter– 1pc.
2. Carry pouch with a strap - 1 pc.
3. User manual – 1 pc.
4. Batteries (AAA) – 3 pcs.
5. USB charger– 1 pc.

TECHNICAL SPECIFICATIONS

Working range
Measuring accuracy
Smallest unit displayed
Automatic shutdown
Laser
Instrument
Display backlight
Reference point setting
Continuous measurement (tracking)
Max./min. value
Addition/subtraction
Area/volume/triangle area/trapezium area +
Calculations by tilt sensor
Calculations by Pythagoras' Theorem
Stake out function
4
XP4 CONDTROL
User manual
0,05– 100 m*
± 1,5 mm**
1 mm
Adjustable
Adjustable
+
+
+
+
+
+
+
+
LASER DISTANCE METER
EN
Digital viewfinder
Digital vial
Timer
Memory
Laser type
Working temperature
Storage temperature
Dust and water protection
Dimensions
Weight
Power supply
* Use a reflector to increase the measurement range during daylight or if the
target has poor reflection properties.
** Accuracy can decrease under unfavorable conditions, such as intense sunshine
or when measurements are made against glossy or transparent surfaces, moving
objects, objects with rough surface or when laser beam is reflected.
XP4 CONDTROL
User manual
+
+
+
up to 50 values
Class II, 635 nm, power <1 mW
0 °С ... +40 °С
–20 °С ... +60 °С
IP54
136х59х28 mm
170 g
3 х battery AAA 800 mAh 1.2V
Ni-MH
5