Setting The Recoding Mode - Teac CD-H750 Bedienungsanleitung

You can set the bit rate, speed and number of tracks (one or all) when
recording.
1 Press the CD/USB button repeatedly to select "CD".
2 Hold down the RECORD button more than 3 seconds.
"REC SET: MP3 XXK" appears on the display.
< If no disc has been loaded, ("No disc" on the display), the display
will not change and you will not be able to proceed with the
next step.
Each time the RECORD button is pressed, the mode is changed as
follows:
Bit rate (64k, 96k, 128k, 192k)
Recording Speed (x1, x2)
Number of recorded songs (1song, CD ALL)
< If you need to change a setting that you have already passed,
return to the ordinary display and repeat these procedures from
2
step .

Setting the Recoding Mode

Bit rate
You can set the bit rate of MP3 files for recording.
Each time the Skip/search button ( ,/ ) pressed, the bit rate is
changed as follows:
Recording speed
You can set the recording speed to ×1 or ×2.
Each time the Skip/search button ( ,/ ) pressed the recording
speed is alternated between ×1 and ×2.
Number of songs to be recorded
You can set the number of songs to be recorded.
Each time the Skip/search button ( ,/ ) is pressed the number
of songs to be recorded is alternated between "1 song" and "CD ALL".
CD/Stop
REC SET: MP3 64K
64k 96k 128k 192k
CD/Stop
REC SET: CD X1
3
c
CD/Stop
REC SET: CD X2
CD/Stop
REC SET: 1 song
3
c
CD/Stop
REC SET: CD ALL
25