Before Use; Setting The Clock - Teac CR-H101 Bedienungsanleitung

Before use

V Placement of the unit
o Avoid placing it in high temperature environments
such as in direct sunlight or close to a source of heat.
Moreover, do not place the unit on an amplifier or any
other device that generates heat. Doing so could cause
discoloration, deformation or malfunction.
o Do not place anything on top of the unit. Do not put
cloth on top of the unit or place it on top of bedding or
thick carpet.
Maintenance
Wipe dirt from the top cover and other panel surfaces using
a soft cloth that has been slightly dampened with a diluted
neutral cleanser.
Do not use chemically-treated wipes, thinner or similar sub-
stances because they could damage the surface of the unit.
V For safety, disconnect the power cord from
the outlet before cleaning.

Setting the clock

This unit has a clock built-in.
After completing connections, set the current time.
The time appears on the display when, for example, the unit
is in standby mode.
o See "Set clock (time settings)" on page 24 for how to
set the clock.
Example of display when in standby
T AM 09:18
Current time
Appears when the on/off timer is on
o The clock will be reset if the unit's power cord is discon-
nected from an outlet. Reset the current time when you
use the unit.
o The clock is not perfectly precise, so we recommend
resetting the time occasionally.
7