Connector; Guided Magnetic Tape Position Measuring System - Balluff BML-S1G0-.7..-M5E.-.0 Serie Betriebsanleitung

BML-S1G0-_7_ _-M5E_-_0-_ _
Absolute Magnetically Coded Position Measuring System
10
Accessories (continued)
10.5 BML Configuration Tool BAE PD-ML-010-03
(order code BAE00UN)
The Configuration Tool allows the measurements, BEF
number, and error messages to be read out from the BML
sensor head.
Diagnostics data (BEF number, see BEF diagnosis data on
page 21) can be enabled and disabled.
At the same time, the sensor head can be parameterized
with the Configuration Tool (changing between BiSS and
SSI, resolution, etc.).
Ring applications (see section 4.1.1 on
page 10) must be calibrated with the
Configuration Tool.
10.6

Connector

Permissible bending radius
– Fixed routing
– Moved
Cable material
Connector
Fig. 10-3: M12 plug, 12-pin
For the pin assignment and colors see
Tab. 4-4 on page 13.
Type
BCC M41C-0000-1A-169-PS0C08-020-C009
BCC M41C-0000-1A-169-PS0C08-050-C009
BCC M41C-0000-1A-169-PS0C08-100-C009
BCC M41C-0000-1A-169-PS0C08-150-C009
BCC M41C-0000-1A-169-PS0C08-200-C009
Observe voltage drop in cable!
1)
Tab. 10-1: Connectors: cable lengths and voltage drop
Examples:
– BCC M41C-0000-1A-169-PS0C08-020-C009 = cable
length 2 m
– BCC M41C-0000-1A-169-PS0C08-050-C009 = cable
length 5 m
30 english
7.5 × outer diameter
15 × outer diameter
PUR
M12x1, 12-pin
~44
Order code
BCC09MW
BCC09MY
BCC09MZ
BCC09N0
BCC09N1
10.7 Guided magnetic tape position measuring
system
Sensor guide consisting of a BML-R01-M_ _ _ aluminum
rail to hold the magnetic tape and a
BAM GM-ML-01-C04(BAM021H) slide with gliders to
guide the sensor head.
Length Resistance
[m] [ohms]
2 0.8
5 2
10 4
15 6
20 8
Supply voltage
5 V 10...28 V
OK OK
OK OK
OK
1)
OK
1)
OK
1)