Remote Control - Klarfit Vib 1000 Bedienungsanleitung

REMOTE CONTROL

The eff ective reception range of the remote control is 2.5 metres, the infrared emission in-
dicator of the controller should be aligned to the receiving window on the display of the unit.
POWER - Turns the machine on or off
PROGRAM - Pressing this button will select the
automaticprogram. If you press it again it will se-
lect the second program, repeatedly pressing it
will cycle through the automatic programs and
manual mode. See "Settings and Use" for more
details on programs.
START /STOP - Pressing this button will start and
stop the machines in all modes, then you can adjust
the speedwhen in use. You cannot adjust the time
when in use.
INCREASE TIME - Will increase the time of the pro-
gram. This needs to be done before starting the
program. Default time is 10 minutes, will adjust
time by 1 minute at a time. Cannot increase time
over 10 minutes.
DECREASE TIME - Will decrease the time of the pro-
gram. This needs to be done before starting the
program.
Default time is 10 minutes, will adjust time by 1
minute at a time.
INCREASE S PEED - Will increase the speed during
in use in manual mode. Between levels 1-20. This
Will not function during automatic programs
DECREASE SPEED - Will decrease the speed du-
ring in use in manual mode. Between levels 1-20.
This will not function during automatic programs.
23