Material Requirements For Plastic Cases And Case Parts; Material Requirements For Printed Circuit Boards; Marking Of Plastic Materials; Batteries - MAXDATA FUSION 1000 Benutzerhandbuch

Material Requirements for Plastic Cases and Case Parts

• All plastics used for the case are manufactured without the use of dioxins and furans.
• An independent testing laboratory in Germany has tested and approved the character-
istics of the plastics used.

Material Requirements for Printed Circuit Boards

• All our suppliers have ensured us that their circuit boards do not contain PCB (poly-
bromite biphenyl), PBDE (polybromite diphenylether) or chlorinated paraffin.

Marking of Plastic Materials

• All plastic parts of this device are marked in accordance with ISO 11469. This ensures
a problem free separation of the different materials when recycling.

Batteries

This device does not contain batteries containing heavy metals. The lithium batteries used
have an extremely long life span (> 10 years). Please consult the notes in the manual con-
cerning servicing, replacement or disposal of the battery.

Energy Consumption

Our workstations have been devised to be particularly energy saving. The data on the type
plate applies to the maximum permissible power consumption. The devices can be discon-
nected from an external power source for at least 4 weeks without losing any functionality.
You can specify the individual time settings for the different energy-saving modes in the
BIOS setup. Please refer to the user guide for your mainboard for information on the ap-
propriate procedure. The only way to prevent any energy consumption at all is to disconnect
the workstation from the power supply (by disconnecting the mains plug).
MAXDATA Workstation FUSION 1000
UK
53