Technical Specifications - MAXDATA FUSION 1000 Benutzerhandbuch

Technical Specifications
Your workstation requires alternating current at 50/60 Hz. To connect the device to the power
supply, plug in the power cable. To disconnect it from the power supply, pull out the power
cable. Utilize an easily accessible grounded outlet.
The input voltage is: 200 - 240 V~.
Operating environment:
Temperature : 10°C - 35°C
Humidity : 30% - 70% relative humidity
(non-condensing)
Dimensions: Width / mm
190
Please refer to the box label for more detailed information on the system's specifications
(motherboard, graphics, sound etc.).
50
Height / mm Depth / mm
450 505
Introduction