Vdsl Setup - Linksys X6200 Benutzerhandbuch

VDSL Setup

If your connection is VDSL (i.e., if it goes over the phone line but has a download speed
greater than 24Mbps) you must set up the modem router manually. Your Internet service
provider may refer to VDSL as ''fibre.'' As long as you have the correct information from
your Internet service provider (ISP) this is simple and quick.
1. Click on the Setup>Basic Setup tab. In the Physical Setting section, select DSL for
Physical Type, and PTM for DSL Mode.
2. If your ISP requires a VLAN, select Enable VLAN and enter the VLAN ID required
by your ISP. Check with your provider's helpdesk if you're not sure which to use.
9