Linksys X6200 Benutzerhandbuch Seite 192

WPA2/WPA Mixed, WPA2 Personal, and WPA Personal
Enter a passphrase of 8-63 characters. The default is password. If you used the
•
setup software for installation, then the default is changed to a unique passphrase.
WPA Enterprise, WPA2 Enterprise, and WPA2/WPA Enterprise Mixed
• Used in coordination with a RADIUS server. (This should only be used when a
RADIUS server is connected to the router.)
• Enter the IP address of the RADIUS server.
• Enter the port number of the RADIUS server. The default is 1812.
• Enter the key shared between the router and the server.
WEP
• WEP is a basic encryption method, which is not as secure as WPA.
• Encryption----- -Select a level of WEP encryption, (40/64-bit 10 hex digits) or
104/128-bit (26 hex digits). The default is 40/64-bit (10 hex digits).
Passphrase----- -Enter a passphrase to automatically generate the WEP key. Then
•
click Generate.
• Key 1----- -If you did not enter a passphrase, enter the WEP key manually.
• .
Disabled
If you choose to disable wireless security, you will be informed that wireless security is
disabled when you first attempt to access the Internet. You will be given the option to
enable wireless security, or confirm that you understand the risks but still wish to proceed
without wireless security.
Note—When wireless security is disabled, anyone can access your wireless network at
any time.
20