Calibration; Information On Disposal; Accessories - Wohler SWF 233 Bedienungsanleitung

6. Calibration

6. Calibration
SWF 233 is calibrated and adjusted by Wöhler before shipment. It is not pos-
sible to adjust SWF 233 without special instrument. If there are any problems
the instrument should be sent to Wöhler or Wöhler distributor for repair.
Wöhler recommends a calibration and adjustment interval of six months.

7. Information on disposal

You may hand in any defective batteries taken out of the unit to our company
as well as to recycling places of public disposal systems or to selling points
of new batteries or storage batteries.
In the European Union, electronic equipment does not belong into domestic
waste but - in accordance with Directive 2002/96/EC of the European Parlia-
ment and of the Council of 27 January 2003 on Waste Electrical and Electro-
nic Equipment - must be disposed of in an expert manner. If you do no longer
need this unit, please dispose of it in accordance with the applicable statutory
provisions.

8. Accessories

Foldable hood (340 x 340 mm) for measurement on supply
and exhaust air valves up to 330x330 mm.
Height = 640 mm,
Three hydraulic diameters according to the
recommendationsof the Nordic Ventilation Group
Exhaust adapter 370 x 370 mm, 280 mm height
Exhaust adapter 324 x 324 mm, 110 mm height
e-Mail: mgkg@woehler.com
Part.-N° 9486
Part.-N° 4448
Part.-N° 4449
http://mgkg.woehler.com
SWF 233
15