Evaluating The Results - Beurer BF 1000 Gebrauchsanweisung

c) Water proportion
– Use the [ ] button to switch to showing water proportion
The trend for your body's water proportion is shown from measurement to meas-
urement. The reference line represents the average value for all water proportion
measurements; the bars show whether the values have gone up or down.
d) Muscle percentage
– Use the [ ] button to switch to showing muscle percentage
The trend for your muscle percentage is shown from measurement to measure-
ment. The reference line represents the average value for all muscle percentage
measurements; the bars show whether the values have gone up or down.
Showing stored measurements
– Press the menu button [
stored measurement appears in the display. The measurement date and the
memory space number are shown at the top, e.g. (03-03) means the third
memory space = the last of a total of 3 occupied memory spaces.
– Use the [ , ] buttons to cycle through the memory spaces.
Average values
– Press the menu button [
stored measurements are shown in the display.
The dates of the first and the last measurement are shown at the top.
Calorie consumption
– Press the menu button [
The theoretically calculated basal metabolic rate BMR and the active meta-
bolic rate AMR are shown in Kcal.
Switching off the scale (standby mode)
– Wait until the display switches itself off or press the [ ] button on the control unit to switch the display off
manually. The date and time remain visible.

11. Evaluating the results

Body fat percentage
Body fat values are shown in the display and analysed with the bar chart. The subsequent body fat percentages
serve as a guideline (for further information ask your doctor).
] until is selected. The most recent measured
] until is selected. All average values in the
] until is selected.
.
.
27
23-05-2018
18:33
23-05-2018
18:33
23-05-2018 10: 12
M
BF
ok
23-05-2018
18:33
BF
ok
23-05-2018 18:33
kcal
BMR: KCAL
AMR: KCAL