Tare Function; Evaluating The Results - Beurer BF 950 Gebrauchsanweisung

If a user was assigned, your initials will be displayed and the weight will be saved. "--" will
briefly be displayed on the LCD. A BIA analysis is not possible.

Tare function

The tare function provides an easy method of weighing small children (under 2 years old) using tare weighing.
To do this, you must create a user with user data for the infant in the "beurer HealthManager Pro" / "beurer
HealthManager" app. Alternatively, you can create a user with user data on the scale itself (see "Creating a
user").
In the tare function, automatic user assignment for this user is switched off. To use the tare function, proceed
as follows for each measurement:
1. Briefly apply pressure to the scale.
2. Use the " " button to select the user memory for the infant and wait 3 seconds. The tare function
symbol appears on the display.
3. Now step on the scale. You can choose whether to hold the infant in your arms on the first or second
measurement.
4. After the first measurement, the first weight is briefly displayed. Step off the scale; "0.0" appears and the
scale is ready for the second measurement. Both values appear on the display first; the display then swit-
ches to the difference in weight, which is also saved.
Pregnancy mode
Pregnancy mode allows pregnant women to monitor and compare their weight in the app with greater preci-
sion during this special time.
To do so, the pregnant woman must create a user in the "beurer HealthManager Pro" / "beurer HealthMana-
ger" app and select "pregnant" in the user data. If you select "pregnant" in the user data, you cannot select
a target weight.
Alternatively, you can create a user with user data on the scale itself (see "Creating a user").
When pregnancy mode is activated, no current flows through the body during weighing and no analytical
values can be determined. Only the weight with initials is displayed and the pregnancy symbol
To use pregnancy mode, proceed as follows:
1. Briefly apply pressure to the scale.
2. Use the " " button to select the user memory for the pregnant woman. The pregnancy symbol
on the display.
3. Step onto the scale. The weight appears on the display and the pregnancy symbol

8. EVALUATING THE RESULTS

Target weight LED motivator
The "target weight" function must be activated in the app settings (or using the buttons on the scale) and a
corresponding target weight must have been stored in the respective user data. If "pregnant" has been spe-
cified in the user data, no target weight can be stored.
The LED motivator provides coloured LED feedback after weighing to indicate whether the target weight has
been achieved.
There are various scenarios:
Weight maintained: The target weight is less than +/– 1 kg different to the start value.
• All 9 LEDs light up in green if the next measurements are within +/–1 kg of
the start value.
• The first LED lights up in red if the measurements are outside this range.
23
kg
flashes.
appears
flashes briefly.