Troubleshooting - Klarstein 10032102 Bedienungsanleitung

EN
56

TROUBLESHOOTING

There is no coffee coming out of the grinder. It seems as though the coffee is
completely clogged inside the grinder.
• Please follow the steps outlined in chapters CLEANING AND CARE to clean the
grinder and grinder chute.
• Double check that the upper burr is locked into place before grinding.
• Call Customer Service for additional guidance to remove tough clogs.
Upper burr does not fit back into the machine.
• Double check that the fineness knob is in the RELEASE position before placing the
upper burr back into the machine.
• Follow location of upper burr handle as shown in Fig. 8 & Fig. 9.
The machine beeps when I press the BREW button.
Check the following:
• Bean container lid is on, pushed down and fully engaged.
• Removable water tank is on, pushed down and fully engaged.
• Ensure the bean container is locked into place. Correctly attach bean container.
• If all loose parts are engaged correctly, unplug machine from wall outlet for 30
seconds. Replug and attempt to to press brew button again.
Can the grinder run without beans in the bean container?
• Yes, it is ok if the grinder runs without any beans.
Can I have different grind amount settings for the current and the Auto-On
mode?
• Yes. See chapter SETTINGS.